Fly On In !  

Tidewater EP Seaplane RT

This is the 2.4GHz Radio Controlled, Brushless Electric Powered,       
               Ready to Fly Tidewater Seaplane from Flyzone.                  
FEATURES: Construction: AeroCell foam                                         
          Wing: One-piece with motor and pod, wing attaches to fuselage with  
            1/4-20x2 nylon wing bolt                                          
          Aileron Control: Dual servo                                         
          Motor: 28-30-1300 kV brushless outrunner                            
          Radio: Tactic 2.4GHz TTX404 4-channel transmitter with TR624        
            6-channel receiver                                                
          Electronic Speed Control: 30A                                       
          Servos: Four micro (2-aileron, 1-rudder, 1-elevator)                
          Battery: ElectriFly 3S 11.1V 2200mAh 30C with Deans Ultra Plug      
          Battery Charger: Great Planes AC/DC 3S balancing LiPo Smart Charger 
          Propeller: 9x4.5 ElectriFly PowerFlow Slo-Flyer, plastic construction
          Spinner: 2" (51mm) gray plastic                                     
          Landing Gear: Two tip floats on either side of wing                 
          Warranty: Flyzone guarantees this kit to be free from defects in both
            material and workmanship at the date of purchase. This warranty   
            does not cover any component parts damaged by use or              
INCLUDES: RTF Tidewater Seaplane with 4-ch 2.4Ghz Radio, Brushless Motor, 30A 
            ESC, Prop, LiPo Battery, Charger, two Tip Floats, Instructions,   
            and four AA Batteries 

SPECS:    Wingspan: 41.5 in (1055mm)                                          
          Length: 36 in (915mm)                                               
          Weight: 32 oz (905g)                                                
          Center of Gravity: Forward CG, 1-3/4" (44mm)                        
                             Recommended CG, 1-7/8" (48mm)                    
                             Aft CG, 2" (51mm)                                
          All measurements are from the leading edge of the wing at the       
            fuselage side                                                     
          Control Throws:         Low Rate                   High Rate        
           Elevator:           1/4" (6mm)  12°            7/16" (11mm) 15°    
           Rudder:             1/2" (13mm) 14°            7/8"  (22mm) 24°    
           Ailerons:           1/4" (6mm)  11°            1/2"  (13mm) 23°    
COMMENTS: The servo listed as the replacement in the manual is                
           not correct. The actual replacement is FLZA6283. The               
           GPMA4224 can be used but the modeler will have to                  
           change the servo arm as well.                                      
          The manual incorrectly lists the wingspan as 73" This is incorrect, 
            the actual wingspan is 41.5 in (1055mm). 
Website Builder